CLI Guide
cfgSsnMgtRacadmTimeout (Read/Write)
Table 190. Details of cfgSsnMgtRacadmTimeout
Description Denes the idle timeout in seconds for the Remote RACADM interface. If a remote RACADM session remains
inactive for more than the specied timeout, the session is automatically ended.
Legal Values 0, 10 –1920
Default iDRAC - 60
CMC - 30
Example
racadm getconfig -g cfgSessionManagement cfgSsnMgtWebserverTimeout=0
cfgSsnMgtTelnetIdleTimeout=0
cfgSsnMgtSshIdleTimeout=300
cfgSsnMgtRacadmTimeout=0
cfgSsnMgtWebserverTimeout (Read/Write)
Table 191. Details of cfgSsnMgtWebserverTimeout
Description Denes the Web server time-out. This property sets the amount of time (in seconds) that a
connection is allowed to remain idle (there is no user input). The session is cancelled if the time
limit set by this property is reached. Changes to this setting do not aect the current session.
You must log out and log in again to make the new settings eective.
An expired Web server session logs out the current session.
Legal Values 60 – 10800
Default 1800
cfgSerial
This group contains conguration parameters for CMC services. One instance of the group is allowed.
Use this object with the getconfig or config subcommands.
To use this object property, you must have the Chassis Conguration Administrator privilege.
The following sections provide information about the objects in the cfgSerial group.
NOTE
: The cfgSerial object group is applicable for iDRAC Enterprise on server modules for only two properties—
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
130 CMC Property Database Group and Object Descriptions