CLI Guide

This setting takes eect only if the cfgRhostsSyslogEnable
parameter is set to 1 (enabled).
Legal Values 10–65535
NOTE: The following port numbers are reserved and
cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096, 5988,
5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogEnable (Read or Write)
Table 170. Details of cfgRhostsSyslogEnable
Description Enables or disables remote syslog to allow the RAC and SEL logs to
be written to up to three remote syslog servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogServer1 (Read or Write)
Table 171. Details of cfgRhostsSyslogServer1
Description Species the rst of three possible remote syslog servers to store
the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
cfgRhostsSyslogServer2 (Read or Write)
Table 172. Details of cfgRhostsSyslogServer2
Description Species the second of three possible remote syslog servers to
store the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
122 CMC Property Database Group and Object Descriptions