User's Manual

60 Configuring CMC to Use Command Line Consoles
8 In the Modem Dialing and Parameter Setup menu, press <Backspace>
to clear the
init , reset , connect , and hangup settings so that they are blank,
and then press <Enter> to save each blank value.
9 When all specified fields are clear, press <Enter> to exit the Modem
Dialing and Parameter Setup
menu.
10 Select Save setup as config_name and press <Enter>.
11 Select Exit From Minicom and press <Enter>.
12 At the command shell prompt, type minicom <Minicom config
file name>
.
13 Press <Ctrl+a>, <x>, <Enter> to exit Minicom.
Ensure that the Minicom window displays a login prompt. When the login
prompt appears, your connection is successful. You are now ready to login
and access the CMC command line interface.
Required Minicom Settings
Use Table 3-3 to configure any version of Minicom.
Table 3-3. Minicom Settings
Setting Description Required Setting
Bps/Par/Bits 115200 8N1
Hardware flow control Yes
Software flow control No
Terminal emulation ANSI
Modem dialing and
parameter settings
Clear the init, reset, connect, and
hangup settings so that they are
blank