User's Manual

Troubleshooting and Recovery 403
To access the Diagnostic Console page:
1
Log in to the CMC Web interface.
2 Click Chassis in the system tree.
3 Click the Troubleshooting tab.
4 Click the Reset Components subtab. The Reset Components page
displays. The
CMC Summary section of the Reset Components page
displays the following information:
Table 12-11. CMC Summary
Attribute Description
Health OK CMC is present and communicating with its
components.
Informational Displays information about CMC when no
change in health status (OK, Warning, Severe)
has occurred.
Warning Warning alerts have been issued, and
corrective action must be taken. If corrective
actions are not taken, critical or severe failures
that can affect the integrity of CMC can occur.
Severe At least one failure alert has been issued.
Severe status represents a CMC system failure,
and corrective action must be taken
immediately.
Date/Time Displays the date and time for the CMC using
the format MM/DD/YYYY, where MM is the
month, DD is the date, and YYYY is the year.
Active CMC
Location
Displays the location of the active CMC.
Redundancy
Mode
Displays Redundant if a standby CMC is present in the chassis, and
No Redundancy if no standby CMC is present in the chassis.