User's Manual

Troubleshooting and Recovery 399
To view the hardware log:
1
Log in to the CMC Web interface.
2 Click Chassis in the system tree.
3 Click the Logs tab.
4 Click the Hardware Log subtab. The Hardware Log page displays.
To save a copy of the hardware log to your managed station or network:
1
Click Save Log .
A dialog box opens.
2 Select a location for a text file of the log.
NOTE: Because the log is saved as a text file, the graphical images used to
indicate severity in the user interface do not appear. In the text file, severity is
indicated with the words OK, Informational, Unknown, Warning, and Severe.
The date and time entries appear in ascending order. If <SYSTEM BOOT> appears
in the Date/Time column, it means that the event occurred during shut down or start
up of any of the modules, when no date or time is available.
To clear the hardware log, click Clear Log.
NOTE: CMC creates a new log entry indicating that the log was cleared.
Table 12-8. Hardware Log Information
Item Description
Severity OK Indicates a normal event that does not require
corrective actions.
Informational Indicates an informational entry on an event in
which the Severity status has not changed.
Unknown Indicates a noncritical event for which
corrective actions should be taken soon to
avoid system failures.
Warning Indicates a critical event requiring immediate
corrective actions to avoid system failures.
Severe Indicates a critical event that requires
immediate corrective actions to avoid system
failures.