User's Manual

386 Troubleshooting and Recovery
5 Click the Email Alert Settings subtab. The Email Alert Destinations page
displays.
6 Specify the SMTP server IP address:
a Locate the SMTP (Email) Server field, and then type the SMTP
hostname or IP address.
NOTE: You must configure the SMTP e-mail server to accept relayed
emails from the CMC's IP address, a feature which is normally turned off
in most mail servers due to security concerns. For instructions as to how
to accomplish this in a secure manner, refer to the documentation that
came with your SMTP server.
b
Enter the desired originator e-mail for the alert, or leave it blank to
use the default e-mail originator. The default is cmc@<IP_address>
where <IP_address> is the IP address of CMC. To enter a value, the
syntax of the e-mail name is <emailname>[@<domain>], and an e-
mail domain can be optionally specified.
If @<domain> is not specified and there is an active CMC network
domain, then the e-mail address of <emailname>@<cmc_domain>
is used as the source e-mail. If @<domain> is not specified and
CMC has no active network domain, then the IP address of CMC is
used (for example, <emailname>@<IP_address>).
c Click Apply to save your changes.
7 Specify the e-mail address(es) that receive the alerts:
a Type a valid e-mail address in an empty Destination Email
Address
field.
b Enter an optional Name . This is the name of the entity receiving the
e-mail. If a name is entered for an invalid e-mail address, it is ignored.
c Click Apply to save your settings.