User's Manual

Troubleshooting and Recovery 381
You can add and configure SNMP alerts using the Web interface or
RACADM.
Using the Web Interface
NOTE: To add or configure SNMP alerts, you must have Chassis Configuration
Administrator privilege.
NOTE: For added security, it is strongly recommended that you change the default
password of the root (User 1) account. The root account is the default
administrative account that ships with CMC. To change the default password for the
root account, click User ID 1 to open the User Configuration page. Help for that
page is available through the Help link at the top right corner of the page.
1 Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Alerts tab. The Chassis Events page appears.
4 Enable alerting:
a Select the check boxes of the events for which you want to enable
alerting. To enable all events for alerting, select the
Select All check
box.
b Click Apply to save your settings.
5 Click the Traps Settings subtab.The Chassis Event Alert Destinations
page displays.
IOM Absent An expected IOM is not present.
IOM Failure The IOM is not functioning.
Firmware Version Mismatch There is a firmware mismatch for the chassis or server
firmware.
Chassis Power Threshold
Error
Power consumption within the chassis reached the
System Input Power Cap.
SDCARD Absent There is no media in the CMC’s Secure Digital (SD)
card slot, and a configured CMC feature requires it.
SDCARD Error An error occurred while accessing the media in the
CMC's Secure Digital (SD) card slot.
Table 12-2. Chassis Events That Can Generate SNMP and Email Alerts
(continued)
Event Description