User's Manual

Using the iKVM Module 351
3 Enable mouse and/or keyboard for the servers that are to receive the
broadcast commands by selecting the boxes.
or
Press the up or down arrow keys to move the cursor to a target server.
Then press <Alt><K> to select the keyboard box and/or <Alt><M> to
select the mouse box. Repeat for additional servers.
4 Click OK to save the settings and return to the Setup dialog box. Click
or press <Escape> to return to the
Main dialog box.
5 Click Commands . The Commands dialog box appears.
6 Click the Broadcast Enable box to activate broadcasting. The Broadcast
Warning
dialog box appears.
7 Click O K to enable the broadcast.
To cancel and return to the
Commands dialog box, click or press
<Esc>.
8 If broadcasting is enabled, type the information and/or perform the mouse
movements you want to broadcast from the management station.
Only servers in the list are accessible.
To turn broadcasting off:
From the Commands dialog box, clear the Broadcast Enable box.
Managing iKVM From CMC
Enabling or Disabling the Front Panel
To enable or disable access to the iKVM from the front panel using
RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm config -g cfgKVMInfo -o cfgKVMFrontPanelEnable
<value>
where <value> is 1 (enable) or 0 (disable).
For more information about the config subcommand, see the config
command section in the Command Line Reference Guide for iDRAC6 and
CMC.