User's Manual

348 Using the iKVM Module
To reset a lost or forgotten password using RACADM, open a
serial/Telnet/SSH text console to CMC, log in, and type:
racadm racresetcfg -m kvm
NOTE: Using the racresetcfg command resets the Front Panel Enable and Dell
CMC Console Enable settings, if they are different from the default values.
For more information about the racresetcfg subcommand, see the racresetcfg
section in the Command Line Reference Guide for iDRAC6 and CMC.
Changing the Language
Use the Language dialog box to change the OSCAR text to display in any of
the supported languages. The text immediately changes to the selected
language on all of the OSCAR screens.
To change the OSCAR language:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Setup and then Language . The Language dialog box appears.
3 Click the radio button for the desired language, and then click OK .
Displaying Version Information
Use the Version dialog box to display the iKVM firmware and hardware
versions, and to identify the language and keyboard configuration.
To display version information:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Command s and then Display Versions . The Version dialog box
appears.
The top half of the
Version dialog box lists the subsystem versions in the
appliance.
3 Click or press <Esc> to close the Version dialog box.
Scanning Your System
In scan mode, the iKVM automatically scans from slot to slot (server to
server). You can scan up to 16 servers by specifying which servers you want to
scan and the number of seconds that each server is displayed.