User's Manual

Power Management 329
Using RACADM
Open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm chassisaction -m chassis <action>
where < action > is powerup, powerdown, powercycle,
nongraceshutdown or reset.
Executing Power Control Operations on an IOM
You can remotely execute a reset or power cycle on an individual IOM.
NOTE: To perform power management actions, you must have Chassis Control
Administrator privilege.
Using the Web Interface
1 Log in to the CMC Web interface.
2 Select I/O Modules Overview .
The
I/O Modules Status page displays.
3 Click the Power tab.
The
Power Control page displays.
4 Select the operation you want to execute ( reset or power cycle ) from the
drop-down menu beside the IOM in the list.
5 Click Apply .
A dialog box appears requesting confirmation.
6 Click OK to perform the power management action (for example,
cause the IOM to power cycle).
Using RACADM
Open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm chassisaction -m switch-<n> <action>
where < n > is a number 1-6 and specifies the IOM (A1, A2, B1, B2, C1, C2),
and
< action > indicates the operation you want to execute: powercycle
or reset .