User's Manual

268 Using the CMC Directory Service

NOTE: When you use the Specify Server option, the host name in the

certificate authority-signed certificate is not matched against the name of the

specified server. This is particularly useful if you are a CMC administrator,

because it enables you to enter a host name as well as an IP address.

After you enable the

Specify Server

option, you can specify an LDAP

server and global catalog with IP addresses or fully qualified domain names

(FQDNs) of the servers. The FQDNs consist of the host names and the

domain names of the servers.

To specify an LDAP server, type:

racadm config -g cfgActiveDirectory -o

cfgADDomainController <AD domain controller IP

address>

To specify a Global Catalog server, type:

racadm config -g cfgActiveDirectory -o

cfgADGlobalCatalog <AD global catalog IP address>

NOTE: Setting the IP address as 0.0.0.0 disables CMC from searching

for a server.

NOTE: You can specify a list of LDAP or global catalog servers separated by

commas. CMC allows you to specify up to three IP addresses or host names.

NOTE: LDAP or LDAPs that are not correctly configured for all domains and

applications may produce unexpected results during the functioning of the

existing applications/domains.

Specify a DNS server using one of the following options:

• If DHCP is enabled on CMC and you want to use the DNS address

obtained automatically by the DHCP server, type the following command:

racadm config -g cfgLanNetworking -o

cfgDNSServersFromDHCP 1

• If DHCP is disabled on CMC, or if DHCP is enabled but you want to

specify your DNS IP address manually, type following commands:

racadm config -g cfgLanNetworking -o

cfgDNSServersFromDHCP 0

racadm config -g cfgLanNetworking -o

cfgDNSServer1