User's Manual

218 Using FlexAddress
Activating FlexAddress
FlexAddress is delivered on a Secure Digital (SD) card that must be inserted
into CMC to activate the feature. To activate the FlexAddress feature,
software updates may be required; if you are not activating FlexAddress these
updates are not required. The updates, which are listed in the table below,
include server module BIOS, I/O mezzanine BIOS or firmware, and CMC
firmware. You must apply these updates before you enable FlexAddress.
If these updates are not applied, the FlexAddress feature may not function
as expected.
Component Minimum required version
Ethernet Mezzanine card - Broadcom
M5708t, 5709, 5710
Boot code firmware 4.4.1 or later
iSCSI boot firmware 2.7.11 or later
PXE firmware 4.4.3 or later
FC Mezzanine card - QLogic QME2472,
FC8
BIOS 2.04 or later
FC Mezzanine card - Emulex LPe1105-
M4, FC8
BIOS 3.03a3 and firmware 2.72A2 or later
Server Module BIOS PowerEdge M600 – BIOS 2.02 or later
PowerEdge M605 – BIOS 2.03 or later
PowerEdge M805
PowerEdge M905
PowerEdge M610
PowerEdge M710
PowerEdge M710hd
PowerEdgeM600/M605 LAN on
motherboard (LOM)
Boot code firmware 4.4.1 or later
iSCSI boot firmware 2.7.11 or later
iDRAC Version 1.50 or later for PowerEdge xx0x
systems
Version 2.10 or later for PowerEdge xx1x
systems
CMC Version 1.10 or later