User's Manual

Using the CMC Web Interface 193
• Do not use the Refresh button or navigate to another page during the
file transfer.
• To cancel the process, click
Cancel File Transfer and Update - this
option is available only during file transfer.
• Update status displays in the
Update State field; this field is
automatically updated during the file transfer process.
NOTE: The update may take up to two minutes for the iKVM.
When the update is complete, iKVM resets and the new firmware is displayed
on the Firmware Update page.
Updating the IOM Infrastructure Device Firmware
By performing this update, the firmware for a component of the IOM device is
updated, but not the firmware of the IOM device itself; the component is the
interface circuitry between the IOM device and CMC. The update image for
the component resides in the CMC file system, and the component displays as
an updatable device on the CMC Web GUI only if the current revision on the
component and the component image on CMC do not match.
1
Log back in to CMC Web interface.
2 Select Chassis Overview in the system tree.
3 Click the Update tab. The Firmware Update page appears.
4 Select the IOM device to update by selecting the Update Targets check
box for that IOM device.
5 Click the Apply IOM Update button below the IOM component list.
NOTE: The Firmware Image field does not display for an IOM infrastructure
device (IOMINF) target because the required image resides on CMC. CMC
firmware should be updated first, before updating IOMINF firmware.
IOMINF updates are allowed by CMC if it detects that the IOMINF
firmware is out-of-date with the image contained in CMC file system. If
the IOMINF firmware is up-to-date, CMC prevents IOMINF updates.
Up-to-date IOMINF devices are be listed as updatable devices.
6 Click Begin Firmware Update . The Firmware Update Progress section
provides firmware update status information. A status indicator displays
on the page while the image file uploads. File transfer time can vary greatly