User's Manual

Using the CMC Web Interface 141
• Grayed Out - the LCD is present and not powered on. It is not
communicating with CMC and there is no adverse condition.
2 Move the cursor over the LCD subgraphic. The corresponding text hint or
screen tip, which provides additional information on the LCD is displayed.
3 Click the LCD subgraphic to select the LCD's information and display it
to the right side of the chassis graphics.
Viewing World Wide Name/Media Access
Control (WWN/MAC) IDs
The WWN/MAC Summary page allows you to view the WWN configuration
and MAC address of a slot in the chassis.
Fabric Configuration
The Fabric Configuration section displays the type of Input/Output fabric
that is installed for Fabric A, Fabric B, and Fabric C. A green check mark
indicates that the fabric is enabled for FlexAddress. The FlexAddress feature
is used to deploy chassis assigned and slot persistent WWN/MAC addresses
to various fabrics and slots within the chassis. This feature is enabled on a per
fabric and per slot basis.
NOTE: See "Using FlexAddress" on page 217 for more information on the
FlexAddress feature.