User's Manual

140 Using the CMC Web Interface
Viewing the LCD Status
You can view the health status of the LCD using the chassis graphics
associated with the chassis on the Chassis Health page.
To view the health status for the LCD:
1
Log in to the CMC Web interface.
The
Chassis Health page is displayed. The top section of Chassis Graphics
depicts the front view of the chassis. LCD health status is indicated by the
overlay of the LCD subgraphic:
• No overlay - LCD is present, powered on, and communicating with
CMC. There is no adverse condition.
• Amber caution sign - warning alerts have been issued and corrective
action must be taken.
• Red X - at least one failure condition is present. The health status is
critical.
Warning Indicates that only warning alerts have been
issued, and corrective action must be taken. If
corrective actions are not taken, then critical or
severe failures that can affect the integrity of
the module may occur.
Severe Indicates that one failure alert has been issued.
Severe status represents a system failure on the
module and corrective action must be taken
immediately.
Unknown Indicates that communication with the
module has not been established. This is
usually because the chassis is off or the chassis
has not completed initialization.
Reading Displays the current temperature in degrees Centigrade and
Fahrenheit.
Threshold
Maximum
Displays the highest temperature, in degrees Centigrade and
Fahrenheit, at which a Failure alert is issued.
Table 5-34. Temperature Sensors Health Status Information
(continued)
Item Description