User's Manual

Using the CMC Web Interface 121
To view health status for all servers using Chassis Graphics:
1
Log in to the CMC Web interface.
The
Chassis Health page is displayed. The left section of Chassis
Graphics
depicts the front view of the chassis and contains the health
status of all servers. Server health status is indicated by the overlay of the
server subgraphic:
• No overlay - server is present, powered on and communicating with
CMC; there is no indication of an adverse condition.
• Amber caution sign - indicates that only warning alerts have been
issued and that corrective action must be taken.
• Red X - indicates at least one failure condition is present. This means
that CMC can still communicate with the component and the health
status reported is critical.
• Grayed out - indicates that the component is present and not powered
on. It is not communicating with CMC and there is no indication of
an adverse condition.
The Servers Status page provides overviews of the servers in the chassis. To
view health status for all servers using the Servers Status page:
1
Log in to the CMC Web interface.
2 Select Server Overview in the system tree. The Servers Status page
appears.
Table 5-23. All Servers Status Information
Item Description
Slot Displays the location of the server. The slot number is a sequential
number that identifies the server by its location within the chassis.
Name Displays the name of the server, which by default is identified by
its slot name (SLOT-01 to SLOT-16).
NOTE: You can change the default server name. For instructions, see
"Editing Slot Names" on page 124.
Model Displays the server's model name. If this field is blank, the server
is not present. If this field displays Extension of # (where the value
of # is 1-8), the number # is the main slot of a multi-slot server.