Quick Reference Guide

94 RACADM Subcommand Details

• racadm getversion -b

ifconfig

NOTE: To use this subcommand, you must have Execute Diagnostic Commands or

Configure iDRAC permission.

Synopsis

racadm ifconfig

Example

$ racadm ifconfig

eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23

inet addr:10.35.155.136 Bcast:10.35.155.255

Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500

Metric:1

RX packets:2550665 errors:0 dropped:0

overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:1000

RX bytes:272532097 (259.9 MiB) TX bytes:0

(0.0 B)

server-1 2.0.0 PowerEdgeM605

server-2 1.1.0 PowerEdgeM805

server-5 1.1.0 PowerEdgeM710

Subcommand Definition

ifconfig Displays the contents of the network interface table.