Quick Reference Guide

RACADM Subcommand Details 79
NOTE: If no options are provided, the entire log is displayed.
Output
The default output display shows the record number, time stamp, source, and
description. The timestamp begins at midnight, January 1 and increases until
the system boots. After the system boots, the system’s timestamp is used.
NOTE: For iDRAC6 Enterprise on Blade Servers, iDRAC6 Log entries for SystemBoot
displayed using the local racadm command racadm getraclog may not be
correctly formatted. For example, some extra characters may be displayed in the
Description field, or the Source field may be empty.
Sample Output
Record: 1
Date/Time: Dec 8 08:10:11
Source: login[433]
Description: root login from 143.166.157.103
getractime
NOTE: To use this subcommand, you must have Login to iDRAC permission.
Description
With no options, the getractime subcommand displays the time in a
common readable format.
With the -d option, getractime displays the time in the format,
yyyymmddhhmmss.mmmmmms, which is the same format returned by the
UNIX date command.
Synopsis
racadm getractime [-d]
-o Displays the output in a single line.
-s Specifies the starting record used for the display.
Table 2-17. getraclog Subcommand Options
(continued)
Option Description