Quick Reference Guide

60 RACADM Subcommand Details
getflexaddr
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays enabled/disabled status for the entire chassis. If used with -i, the
command displays MACs/WWN on a per slot basis.
NOTE: If FlexAddress is not activated on the chassis, the command displays
server-assigned MAC/WWN addresses. If the slot is empty, the command returns
an error message.
Usage
racadm getflexaddr [-i <slotNum>]
Options
server-3 Not Present None None
server-4 Present None Broadcom M5708t
server-5 Not Present None None
server-6 Not Present None None
server-7 Not Present None None
server-8 Present LPe1105-M4 None
server-9 Extension(1) None None
server-10 Not Present None None
server-11 Not Present None None
server-12 Not Present None None
server-13 Not Present None None
server-14 Not Present None None
server-15 Not Present None None
server-16 Not Present None None
Table 2-13. getflexaddr Subcommand Options
Option Description
-i <slotNum> Specifies the slot information to be displayed. <slotNum> can be
from 1 to 16.