Quick Reference Guide

58 RACADM Subcommand Details
• racadm getconfig -u root
Displays the configuration properties for the user named root.
•
racadm getconfig -g cfgUserAdmin -i 2 -v
Displays the user group instance at index 2 with verbose information for
the property values.
getdcinfo
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays general I/O module and daughter card configuration information.
NOTE: Fabric verification for server DCs is performed only when the chassis is
powered on. When the chassis is on standby power, iDRACs on the server modules
remain powered off and thus are unable to report the server's DC fabric type. The
DC fabric type may not be reported in the CMC user interface until iDRAC on the
server is powered on.
Usage
racadm getdcinfo
Options
Example
The example output below is for a system with multi-slot servers.
racadm getdcinfo
Group A I/O Type : Gigabit Ethernet
Group B I/O Type : Gigabit Ethernet
Group C I/O Type : Gigabit Ethernet
Table 2-12. getdcinfo Subcommand Options
Option Description
-n Displays the model names for the daughter cards in servers.