Quick Reference Guide

54 RACADM Subcommand Details
• Cancel a firmware update in progress.
racadm fwupdate -c
• Upload a firmware image from the client and start the firmware update.
racadm fwupdate -p -u -d firmimg.cmc
NOTE: The fwupdate command generates an error when used on the extension
slot of a multi-slot server.
Output
Displays a message indicating the operation that is being performed.
Examples
• racadm fwupdate -g -u - a 143.166.154.143 -d
<path>
In this example, the -g option tells the firmware to download the firmware
update file from a location (specified by the
-d option) on the TFTP server
at a specific IP address (specified by the
-a option). After the image file is
downloaded from the TFTP server, the update process begins. When
completed, iDRAC6 is reset.
• racadm fwupdate -s
This option reads the current status of the firmware update.
NOTE: Remote RACADM firmware update through the local path is not supported
on Linux Operating Systems.
NOTE: For CMC, these commands specifically apply to an active-CMC update.
getassettag
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the asset tag for the chassis.
Usage
racadm getassettag [-m <module>]