Quick Reference Guide

50 RACADM Subcommand Details
Usage for iDRAC6
racadm fwupdate -s
racadm fwupdate -g -u -a <TFTP_Server_IP_Address> [-d
<path>]
racadm fwupdate -r
racadm fwupdate -p -u [-d <path>]
Usage for CMC
For local RACADM:
racadm fwupdate -g -u -a <tftp server ip address or
FQDN> -d <path> [-m <module>]
racadm fwupdate -f <ftp server ip address or FQDN>
<username> <password> -d <path> [-m <module>]
racadm fwupdate -u -m iominf-<n>
racadm fwupdate -s [-m <module>]
racadm fwupdate -c [-m <module>]
For remote RACADM:
racadm fwupdate -p -u -d <firmware image>
NOTE: When using FTP, if you provide the full path to the image file on the CLI, then
the CMC uses that path to locate that file on the host. If you do not provide a full
path, then the CMC searches the home directory of the specified user for the file if
the host system is running Linux or another variant of UNIX. If the host system is
running Windows, then a default folder, such as C:\ftproot is searched.
NOTE: When attempting to run firmware update task using "racadm fwupdate"
command, if the firmware image path length is greater than 64 characters, remote
RACADM client exits with the error message "ERROR: Specified path is too long".
Input
Table 2-9 describes the fwupdate subcommand options.