Quick Reference Guide

44 RACADM Subcommand Details
deploy
NOTE: To use this subcommand, you must have Server Administrator privilege.
Description
Configures the static IP address, subnet mask, gateway, and password for the
root user on iDRAC for the specified server.
NOTE: You can also use setniccfg to configure static IP address, subnet mask, and
gateway, as well as DHCP, speed, and duplex properties.
Usage
• racadm deploy -m < module > -u root -p < password > -s
<
ipaddress > < subnet > < gateway > -b < device > -o <no|yes>
• racadm deploy -m < module > -u root -p < password > -s -6
<
ipv6Address > < prefixlen > < gateway > -b < device > -o <no|yes>
NOTE: < prefixlen > must be a number between 0 and 128.
• racadm deploy -m < module > -u root -p < password > -d [-
6]
• racadm deploy -a -u root -p < password >
Options
Table 2-5. deploy Subcommand Options
Option Description
-b <device> Specifies the first boot device; must be used with
-o.
Use with -m <module> to specify for a individual
server, or with -a for all servers
Legal values: device=None, PXE, HDD, CD-
DVD, vFDD, vCD-DVD, iSCSI, SD, FDD
-o
<no|yes> Indicates if the server should boot from the
device once; must be used with
-o.
Use with -m <module> to specify for a individual
server, or with -a for all servers