Quick Reference Guide

RACADM Subcommand Details 43
If available, the coredump information is persistent across iDRAC6 power
cycles and remains available until either of the following conditions occur:
• The coredump information is cleared with the coredumpdelete
subcommand.
• Another critical condition occurs on the RAC. In this case, the coredump
information is relative to the last critical error that occurred.
See the coredumpdelete subcommand for more information about clearing
the coredump.
Synopsis
racadm coredump
coredumpdelete
NOTE: To use this subcommand, you must have Clear Logs or Execute Debug
Commands permission.
Description
The coredumpdelete subcommand can be used to clear any currently
resident coredump data stored in the RAC.
NOTE: If a coredumpdelete command is issued and a coredump is not
currently stored in the RAC, the command displays a success message.
This behavior is expected.
See the coredump subcommand for more information on viewing
a coredump.
Synopsis
racadm coredumpdelete