Quick Reference Guide

42 RACADM Subcommand Details
connect
Description
Connects to the switch or server serial console.
NOTE: You cannot use this subcommand with remote RACADM.
Usage
• racadm connect [-b] <server-n>
• racadm connect [-b] <switch-n>
Options
NOTE: If you use the -b option, reset the CMC to terminate the connect operation.
NOTE: See the Dell Chassis Management Controller User Guide for examples on
using the connect subcommand.
coredump
NOTE: To use this subcommand, you must have Execute Debug Commands
permission.
Description
The coredump subcommand displays detailed information related to any
recent critical issues that have occurred with the RAC. The coredump
information can be used to diagnose these critical issues.
Table 2-4. connect Subcommand Options
Option Description
-b Connects to the switch or console using the binary
mode. This is an optional argument; a server or a switch
must be present.
server-n or
switch-n
Server or switch to connect to.
• server- n where n =1–16
•
switch- n where n =<a1 | a2 | b1 | b2 | c1 | c2>