Quick Reference Guide

iDRAC6 and CMC Property Database Group and Object Definitions 217
FILE LOCATION: C:\Workarea\CMC_iDrac_AdminrefGuide\iDRAC Admin Reference
Guide\EN\Source\racadmDBgrpObjDef.fm
DELL CONFIDENTIAL – PRELIMINARY 12/7/10 - FOR PROOF ONLY
cfgIpmiSol
This group is applicable only for iDRAC6 and is used to configure the Serial
Over LAN (SOL) capabilities of the system.
The following sections provides information about the objects in the
cfgIpmiSol group.
cfgIpmiSolEnable (Read/Write)
cfgIpmiSolBaudRate (Read/Write)
cfgIpmiSolMinPrivilege (Read/Write)
cfgIpmiSolAccumulateInterval (Read/Write)
Description Enables or disables SOL.
Legal Values 1 (TRUE)
0 (FALSE)
Default 1
Description The baud rate for serial communication over LAN.
Legal Values 9600, 19200, 57600, 115200
Default 115200
Description Specifies the minimum privilege level required for SOL access.
Legal Values 2 (User)
3 (Operator)
4 (Administrator)
Default 4
Description Specifies the typical amount of time that iDRAC6 waits before
transmitting a partial SOL character data packet. This value is 1-
based 5ms increments.
Legal Values 1 – 255
Default 10