Quick Reference Guide

186 iDRAC6 and CMC Property Database Group and Object Definitions
FILE LOCATION: C:\Workarea\CMC_iDrac_AdminrefGuide\iDRAC Admin Reference
Guide\EN\Source\racadmDBgrpObjDef.fm
DELL CONFIDENTIAL – PRELIMINARY 12/7/10 - FOR PROOF ONLY
cfgSDWriteProtect (Read only)
cfgLCDriveEnable (Read/Write)
cfgServerInfo
This group allows you to select the BIOS first boot device and to boot the
selected device only once.
For CMC, this group allows you to displays information for and configure a
server in the chassis.
NOTE: Use this object with the config or getconfig subcommands.
NOTE: To use this object property for CMC, you must have Chassis Configuration
Administrator privilege.
Description Displays if the physical write protect latch on the SD card is
enabled or disabled.
NOTE: This command is deprecated from 1.5 and 3.0 releases
onwards. The functionality of this command is now covered by
cfgVFlashSDWriteProtect. While execution of the
cfgSDWriteProtect command is successful, it is
recommended to use the cfgVFlashSDWriteProtect
command. For more information, see "cfgVFlashSDWriteProtect (Read
Only)" on page 264.
Legal Values 1 (TRUE)
0 (FALSE)
Default 0
Description Enable/disable the USC-LCE device from showing up in the
operating system. It must be disabled in ESXi operating system.
Allows proper operation of operating system and drivers interfacing
with the iDRAC/USC-LCE USB devices.
Legal Values 1 (Enabled)
0 (Disabled)
Default 1