Quick Reference Guide

168 iDRAC6 and CMC Property Database Group and Object Definitions
FILE LOCATION: C:\Workarea\CMC_iDrac_AdminrefGuide\iDRAC Admin Reference
Guide\EN\Source\racadmDBgrpObjDef.fm
DELL CONFIDENTIAL – PRELIMINARY 12/7/10 - FOR PROOF ONLY
cfgSerialConsoleColumns
NOTE: This object property is applicable only for CMC.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with the line wrap mode ON, if a
terminal emulator is used.
NOTE: You must log out, then log in again for the changes to take effect.
cfgSerialHistorySize (Read/Write)
cfgSerialCom2RedirEnable (Read/Write)
cfgSerialSshEnable (Read/Write)
Description Specifies the number of columns in the terminal window command
line connected to the serial port.
Legal Values 0 – 256
Default 0 (equivalent to 80)
Description Specifies the maximum size of the serial history buffer.
Legal Values 0 – 8192
Default 8192
Description Enables or disables the console for COM 2 port redirection.
Legal Values 1 (TRUE)
0 (FALSE)
Default 1
Description Enables or disables the secure shell (SSH) interface on iDRAC6 or
CMC.
Legal Values 1 (TRUE)
0 (FALSE)
Default 1