Quick Reference Guide

134 RACADM Subcommand Details
vmdisconnect
NOTE: To use this subcommand, you must have Access Virtual Media permission.
Description
The vmdisconnect subcommand allows a user to disconnect another user's
Virtual Media session. Once disconnected, the Web-based interface reflects
the correct connection status.
The vmdisconnect subcommand enables a iDRAC6 user to disconnect all
active Virtual Media sessions. The active Virtual Media sessions can be
displayed in iDRAC6 Web-based interface or by using the RACADM
subcommands such as remoteimage or getssninfo.
Synopsis
racadm vmdisconnect
vmkey
NOTE: To use this subcommand, you must have Access Virtual Media permission.
Description
When a custom Virtual Media key image is uploaded to the RAC, the key size
becomes the image size. The vmkey subcommand can be used to reset the
key back to its original default size, which is 256 MB on iDRAC6.
Synopsis
racadm vmkey <action>
If <action> is configured as reset, the vFlash memory is reset to the
default size of 256 MB and removes all data from it.
NOTE: This command is deprecated from iDRAC6 1.5 and iDRAC6 3.0 releases
onwards. The functionality of this command is now covered by vflashsd
initialize
. While execution of the vmkey reset command is
successful, it is recommended to use the
vflashsd initialize
command. For more information, see "vflashsd" on page 130.