Quick Reference Guide

RACADM Subcommand Details 131
vflashpartition
NOTE: To use this subcommand, you must have Access Virtual Media privilege.
Description
The vflashpartition subcommand allows you to perform the following:
• Create an empty partition
• Create a partition using an image file
• Format a partition
• View available partitions
• Delete existing partitions
• Get the status of partitions
NOTE: Create partition using image file is not supported in local RACADM.
Synopsis
racadm vflashpartition create <options>
racadm vflashpartition delete <options>
racadm vflashpartition status <options>
racadm vflashpartition list <options>
Options
Table 2-47 describes the sslcertview subcommand options.
Table 2-47. vflashpartition Subcommand Options
Option Description
-i <index> Index of the partition for which this command applies.
<index> must be an integer from 1 to 16.
NOTE: For the standard SD card, the index value is 1 because only one
partition of size 256 MB is supported.
Options valid only with create action