Quick Reference Guide

RACADM Subcommand Details 123
testfeature
Description
Generic test command consisting of several sub-commands that allow you to
verify the configuration and operation of specific features.
Options
Table 2-42. testfeature Subcommand Options
Option Description
-f
<feature>
Specifies the feature name. testfeature supports the following
features:
• ad — Tests Active Directory configuration using simple
authentication (user name and password)
• adkrb — Tests Active Directory configuration using Kerberos
authentication
• ldap — Tests LDAP configuration and operation (requires user
name and password)
-u
<username>
The user name specified in an appropriate format for the selected
authentication method. That is, Active Directory users are
specified as user_name@domain_name.
-p <password> The password for the indicated user account.
-d <bitmask> A bitmask (specified as a hexadecimal value) to select various
diagnostic messaging levels. This option is optional.
NOTE: -d option is not supported with the remote racadm interface.