Quick Reference Guide

104 RACADM Subcommand Details
Synopsis
racadm serveraction <action>
Output
The serveraction subcommand displays an error message if the requested
operation could not be performed, or a success message if the operation
completed successfully.
setassettag
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the N-byte ASCII asset tag for the chassis.
Usage
racadm setassettag -m chassis <asset tag>
Options
Example
Input:
racadm setassettag -m chassis 783839–33
or
racadm setassettag 783839–33
The asset tag was changed successfully.
Table 2-28. setassettag Subcommand Options
Option Command
-m <module> Specifies the module whose asset tag you want to set.
Legal value: chassis
NOTE: Because there is only one legal value, you can
obtain the same output if you do not include this option.
NOTE: <assettag> is a maximum of 64 non-extended ASCII
characters.