Quick Reference Guide

RACADM Subcommand Details 103
Table 2-26 describes the remoteimage subcommand options.
serveraction
NOTE: To use this subcommand, you must have Execute Server Control Commands
permission.
Description
The serveraction subcommand enables users to perform power management
operations on the host system. Table 2-27 describes the serveraction power
control options.
Table 2-26. remoteimage Subcommand Options and Descriptions
Option Description
-c Connect the image.
-d Disconnect image.
-u Username to access the network share.
-p Password to access the network share.
-l Image location on the network share; use double quotes around the
location.
-s Display current status; –a is assumed if not specified
Table 2-27. serveraction Subcommand Options
String Definition
<action> Specifies the action. The options for the <action> string are:
• powerdown — Powers down the managed system.
•
powerup — Powers up the managed system.
•
powercycle — Issues a power-cycle operation on the managed
system. This action is similar to pressing the power button on the
system’s front panel to power down and then power up the system.
•
powerstatus — Displays the current power status of the server (ON
or OFF)
•
hardreset — Performs a reset (reboot) operation on the managed
system.