User's Manual

74 Using the RACADM Command Line Interface
Accessing RACADM Remotely
setslotname Sets the name of a slot in the chassis.
setsysinfo Sets the name and location of the chassis.
sshpkauth Uploads up to 6 different SSH public keys, deletes existing
keys, and views the keys already in the CMC.
sslcertdownload Downloads a certificate authority-signed certificate.
sslcertupload Uploads a certificate authority-signed certificate or server
certificate to the CMC.
sslcertview Views a certificate authority-signed certificate or server
certificate in the CMC.
sslcsrgen Generates and downloads the SSL CSR.
sslresetcfg Regenerates the self-signed certificate used by the CMC
Web GUI.
testemail Forces the CMC to send an e-mail over the CMC NIC.
testfeature Allow you to verify a specific feature's configuration
parameters. For example, it supports testing the Active
Directory configuration using simple authentication (user
name and password) or Active Directory configuration
using Kerberos authentication (Single Sign-on or Smart
Card Login).
testtrap Forces the CMC to send an SNMP over the CMC
Network Interface.
traceroute Prints the route the IPv4 packets take to a network node.
traceroute6 Prints the route the IPv6 packets take to a network node.
Table 4-2. Remote RACADM Subcommand Options
Option Description
-r <racIpAddr>
-r <racIpAddr>:<port>
Specifies the controller’s remote
IP address.
Use <port number> if the CMC port
number is not the default port (443)
Table 4-1. RACADM Subcommands
(continued)
Command Description