User's Manual

Installing and Setting Up the CMC 47
the installed servers, highlight the No icon and press the center button
and continue to step c.
c On the next iDRAC Configuration screen, to apply all iDRAC
network settings to newly installed servers, highlight the
Accept/Yes
icon and press the center button; when a new server is inserted into
the chassis, the LCD will prompt the user on whether to automatically
deploy the server using the previously configured network
settings/policies. To not apply the iDRAC network settings to newly
installed servers, highlight the
No icon and press the center button;
when a new server is inserted into the chassis, the iDRAC network
settings will not be configured.
12 On the Enclosure screen, to apply all enclosure settings highlight the
Accept/Yes icon and press the center button. To not apply the enclosure
settings, highlight the
No icon and press the center button.
13 On the IP Summary screen, review the IP addresses you provided to make
sure the addresses are accurate. To correct a setting, navigate to the left
arrow button and then press the center key to return to the screen for that
setting. After making a correction, press the center button. If necessary,
navigate to the right arrow button and then press the center key to return
to the
IP Summary screen.
When you have confirmed that the settings you entered are accurate,
press the center button. The Configuration Wizard closes and returns
you to the
Main Menu screen.
NOTE: If you selected Yes/Accept, a Wait screen is displayed before the
IP Summary screen is displayed.
The CMC and iDRACs are now available on the network. You can access
the CMC on the assigned IP address using the Web interface or CLIs such
as a serial console, Telnet, and SSH.
NOTE: After you have completed network setup through the LCD Configuration
Wizard, the Wizard is no longer available.