User's Manual

Installing and Setting Up the CMC 39
Downloading Files From CMC With Internet Explorer
When you use Internet Explorer to download files from the CMC you may
experience problems when the Do not save encrypted pages to disk option is
not enabled.
Follow these steps to enable the Do not save encrypted pages to disk option:
1
Start Internet Explorer.
2 Click Tools  Internet Options , then click Advanced .
3 Scroll to the Security section and check Do not save encrypted pages to disk .
Allow Animations in Internet Explorer
When transferring files to and from the Web interface, a file transfer icon
spins to show transfer activity. For Internet Explorer, this requires that the
browser be configured to play animations, which is the default setting.
Follow these steps to configure Internet Explorer to play animations:
1
Start Internet Explorer.
2 Click Tools  Internet Options , then click Advanced .
3 Scroll to the Multimedia section and check Play animations in web pages .
Setting Up Initial Access to the CMC
To manage the CMC remotely, connect the CMC to your management
network and then configure the CMC network settings.
NOTE: To manage the M1000e solution, it must be connected to your management
network.
For information on how to configure the CMC network settings, see
"Configuring the CMC Network" on page 40. This initial configuration
assigns the TCP/IP networking parameters that enable access to the CMC.
The CMC and iDRAC on each server and the network management ports for
all switch I/O Modules are connected to a common internal network in the
M1000e chassis. This allows the management network to be isolated from the
server data network. It is important to separate this traffic for uninterrupted
access to chassis management.