User's Manual
Using the iKVM Module 335
To access the Flag dialog box:
1
Press <Print Screen>. The
Main
dialog box appears.
2
Click
Setup
and then
Flag
. The
Flag
dialog box appears.
To specify how the status flag displays:
1
Select
Displayed
to show the flag all the time or
Displayed and Timed
to
display the flag for only five seconds after switching.
NOTE: If you select Timed by itself, the flag is not displayed.
2
Select a flag color from the
Display Color
section. Options are black, red,
blue, and purple.
3
In
Display Mode
, select
Opaque
for a solid color flag or
Transparent
to see
the desktop through the flag.
4
To position the status flag on the desktop:
a
Click
Set Position.
The
Set Position Flag
displays.
b
Left-click on the title bar and drag it to the desired location on the
desktop.
c
Right-click to return to the
Flag
dialog box.
NOTE: Changes made to the flag position are not saved until you click OK in the
Flag dialog box.
5
Click
OK
to save settings.
To exit without saving changes, click .
Table 10-3. OSCAR Status Flags
Flag Description
Flag type by name
Flag indicating that the user has been disconnected
from all systems
Flag indicating that Broadcast mode is enabled