User's Manual

Power Management 327
The overall power health is at least in Non-Critical state when the chassis is
operating in 110V mode and the user has not acknowledged the 110V
operation. The "Warning" icon is displayed on the GUI main page when in
Non-Critical state.
Mixed 110V and 220V operation is not supported. If the CMC detects that
both voltages are in use then one voltage is selected and those power supplies
connected to the other voltage are powered off and marked as failed.
Troubleshooting
For power supply and power-related issue troubleshooting, see
"Troubleshooting and Recovery" on page 369.