User's Manual

310 Power Management
Viewing Power Budget Status
The CMC provides power status overviews of the power subsystem
on the Power Budget Status page.
Using the Web Interface
NOTE: To perform power management actions, you must have Chassis Control
Administrator privilege.
1 Log in to the CMC Web interface .
2 Select Chassis Overview in the system tree.
3 Click Power  Budget Status .
The
Power Budget Status page displays.
Table 9-11. Server Modules
Item Description
Slot Displays the location of the server module. The Slot is a sequential
number (1–16) that identifies the server module by its location
within the chassis.
Name Displays the server name. The server name can be redefined
by the user.
Present Displays whether the server is present in the slot (Yes or No).
If this field displays Extension of # (where the # will be 1-8),
then number that follows it is the main slot of a multi-slot server.
Actual (AC) Real-time measurement of the actual power consumption of the
server. The measurement is displayed in watts AC.
Cumulative
Power Start
Time
Real-time measurement of the cumulative power that the server
has consumed since the time displayed in the Start Time field.
The measurement is presented in KiloWatt Hour (kWh) units.
Peak
Consumption
Time Stamp
Displays the peak power that the server consumed at one time. The
time when the peak power consumption occurred is recorded in the
Time Stamp field. The measurement is displayed in watts.