User's Manual

Power Management 305
Using RACADM
Open a serial/Telnet/SSH text console to the CMC, log in, and type:
racadm getpminfo
Health OK Indicates that the PSU is present and
communicating with the CMC. In the event of
a communication failure between the CMC
and the power supply, the CMC cannot obtain
or display health status for the PSU.
Warning Indicates that only Warning alerts have been
issued, and corrective action must be taken.
If corrective actions are not taken, it could lead
to critical or severe power failures that can
affect the integrity of the chassis.
Severe Indicates that at least one Failure alert has
been issued for the power supply. Severe status
indicates a power failure on the chassis, and
corrective action must be taken immediately.
Power Status Displays the power state of the power supplies (one of the
following): Initializing, Online, Stand By, In Diagnostics, Failed,
Offline, Unknown, or Absent.
Capacity Displays the power supply’s capacity in watts.
Table 9-7. System Power Status
Item Description
Overall Power
Health
Displays the health status (OK, Non-Critical, Critical,
Non-Recoverable, Other, Unknown) of the power management
for the entire chassis.
System Power
Status
Displays the power status (On, Off, Powering On, Powering
Off) of the chassis.
Redundancy Displays the power supply redundancy status. Values include:
No: Power Supplies are not redundant.
Yes: Full Redundancy in effect.
Table 9-6. Power Supplies
(continued)
Item Description