User's Manual

210 Using the CMC Web Interface
5 Click Connect to connect to a remote file share. To connect a remote file
share, you must provide the path, user name, and password. A successful
operation allows access to the media.
Click
Disconnect to disconnect a previously connected remote file share.
Click
Deploy to deploy the media device.
NOTE: Save all working files before executing the Deploy command
because this action causes the server to be restarted.
This command involves these actions:
– The remote file share is connected.
– The file is selected as the first boot device for the servers.
– The server is restarted.
– Power is applied to the server if the server is turned off.
Power State Displays the power status of the server:
N/A – The CMC has not yet determined the power state of the
server.
Off – Either the server is off or the chassis is off.
On – Both the chassis and the server are on.
Powering On – Temporary state between Off and On.
On success, the Power State is On.
Powering Off – Temporary state between On and Off.
On success, the Power State is Off.
Connect Status Displays the remote file share connection status.
Select/Deselect All Select this option before initiating a remote file share operation.
Remote file share operations are: Connect, Disconnect, and
Deploy.
Table 5-59. Remote File Sharing Settings
(continued)
Setting Description