User's Manual

Using the CMC Web Interface 209
Table 5-59. Remote File Sharing Settings
Setting Description
Image File Path Image File Path is only needed for connect and deploy
operations. It does not apply to disconnect operations. The path
name of the network drive is mounted to the server through a
Windows SMB or Linux/Unix NFS protocol.
For example, to connect to CIFS, type:
//
<IP to connect for CIFS file
system>/<file path>/<image name>
To connect to NFS, type:
//
<IP to connect for NFS file
system>:/<file path>/<image name>
File names that end with .img are connected as virtual floppies.
File names that end with .iso are connected as virtual
CD/DVDs. The maximum number of characters is 511.
User Name User Name is only needed for connect and deploy operations.
It does not apply to disconnect operations. The maximum
number of characters you can specify in this field is 40.
Password Password is only needed for connect and deploy operations.
It does not apply to disconnect operations. The maximum
number of characters you can specify in this field is 40.
Slot Identifies the location of the slot. Slot numbers are sequential
from 1 to 16 (for the 16 available slots in the chassis).
Name Displays the name of the slot. Slots are named depending on
their position in the chassis.
Model Displays the model name of the server.