User's Manual

204 Using the CMC Web Interface
The status page presents the following information:
4 For additional information, click the Help link and review "Using
FlexAddress."
Viewing Server FlexAddress Status
FlexAddress status information can also be displayed for each individual
server. The server level information displays a FlexAddress status overview for
that server.
Use the following steps to view FlexAddress server information:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 103).
2 Expand Server Overview in the system tree. All of the servers (1–16)
appear in the expanded
Servers list.
3 Click the server you want to view. The Server Status page displays.
Fabric
Configuration
Fabric A, Fabric B, and Fabric C display the type of the
Input/Output fabric installed.
iDRAC displays the server management MAC address.
NOTE: If Fabric A is enabled, unpopulated slots display chassis-
assigned MAC addresses for Fabric A and MAC or WWNs for
Fabrics B and C if they are in use by populated slots.
WWN/MAC
Addresses
Displays FlexAddress configuration for each slot in the chassis.
Information displayed includes:
• iDRAC management controller is not a fabric but its
FlexAddress is treated like one.
• Slot number and location
• FlexAddress active/not active status
•Fabric type
• Server-assigned and chassis-assigned WWN/MAC
addresses in use
A green check mark indicates the active address type, either
server-assigned or chassis-assigned.