User's Manual

192 Using the CMC Web Interface
• To cancel the process, click Cancel File Transfer and Update - this
option is available only during file transfer.
• Update status displays in the
Update State field; this field is
automatically updated during the file transfer process.
NOTE: The update may take several minutes for the CMC or Server.
Recovering iDRAC Firmware Using the CMC
iDRAC firmware is typically updated using iDRAC facilities such as the
iDRAC Web interface, the SM-CLP command line interface, or operating
system specific update packages downloaded from support.dell.com. See the
iDRAC Firmware User’s Guide for instructions for updating the iDRAC
firmware.
Early generations of servers can have corrupted firmware recovered using the
new update iDRAC firmware process. When the CMC detects corrupted
iDRAC firmware, it lists the server on the Firmware Update page.
Follow these steps to update the iDRAC firmware.
1
Download the latest iDRAC firmware to your management computer from
support.dell.com .
2 Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 103).
3 Click Chassis Overview in the system tree.
4 Click the Update tab. The Firmware Update page appears.
5 Select the iDRAC or iDRACs of the same model to update by selecting the
Update Targets check box those devices.
6 Click the Apply iDRAC Update button below the iDRAC component list.
7 Click Browse , browse to the iDRAC firmware image you downloaded,
and click
Open .
NOTE: The default iDRAC firmware image name is firmimg.imc. The CMC
firmware should be updated first, before updating IOM infrastructure device
firmware.
8 Click Begin Firmware Update . Additional items to note:
• Do not use the
Refresh button or navigate to another page during
the file transfer.