User's Manual

160 Using the CMC Web Interface

Enable Smart Card

Enables Active Directory inter-operation based on the Kerberos

Authentication supported by a Dell-supplied, auto-installed

browser plug-in and Smart Card usage. To enable Smart Card,

select the check box. To disable Smart Card, clear the check

box. If you enable Smart Card, you must also configure your

Microsoft Windows Client Workstation to correctly operate

with Smart Card Reader functionality. This involves installing

the correct drivers for the Smart Card Reader being used and

also, the correct drivers for the actual Smart Card used. These

Smart Card drivers vary by vendor. The Smart Card must be

properly programmed with the necessary credentials using the

Smart Card Enrollment Services provided by the appropriate

Active Directory Server.

NOTE: Smart Card Login and Single Sign-On selections are

mutually exclusive. You can select only one at a time.

Enable Single

Sign-On

Enables the CMC to utilize Active Directory. To enable Single

Sign-On, select the check box. To disable Single Sign-On, clear

the check box. If you enable Single Sign-On, you must also set

the Active Directory properties and select the schema you want

to use.

NOTE: Smart Card Login and Single Sign-On selections are

mutually exclusive. You can select only one at a time.

Table 5-44. Common Settings

(continued)

Field Description