User's Manual

136 Using the CMC Web Interface
Viewing Status of the Temperature Sensors
The Temperature Sensors Status page displays the status and readings of the
temperature probes on the entire chassis (chassis and servers).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold will generate an alert that will cause the fan speed to vary. For example,
if the CMC ambient temperature probe exceeds threshold, the speed of the fans on
the chassis increases.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
2 Select Temperature Sensors in the system tree. The Temperature Sensors
Status
page displays.
Table 5-34. Temperature Sensors Health Status Information
Item Description
ID Displays the location of the temperature probe.
Name Displays the name of each temperature probe for the chassis and
servers.
Present Indicates whether the module is present (Yes) or absent (No) in the
chassis.
Health OK Indicates that the module is present and
communicating with the CMC. In the event of
a communication failure between the CMC
and the server, the CMC cannot obtain or
display the health status for the server.
Warning Indicates that only warning alerts have been
issued, and corrective action must be taken. If
corrective actions are not taken, then critical or
severe failures that can affect the integrity of
the module may occur.
Severe Indicates that one failure alert has been issued.
Severe status represents a system failure on the
module and corrective action must be taken
immediately.