User's Manual

132 Using the CMC Web Interface
Viewing the iKVM Status
The local access KVM module for your Dell M1000e server chassis is
called the Avocent Integrated KVM Switch Module, or iKVM.
The health status of the iKVM associated with the chassis can be viewed
on the Chassis Health page.
To view health status for the iKVM using Chassis Graphics:
1
Log in to the CMC Web interface.
The
Chassis Health page is displayed. The lower section of Chassis
Graphics
depicts the rear view of the chassis and contains the health
status of the iKVM. iKVM health status is indicated by the overlay of
the iKVM subgraphic:
• No overlay - iKVM is present, powered on and communicating with
the CMC; there is no indication of an adverse condition.
Table 5-31. Fans Health Status Information
Item Description
Name Displays the fan name in the format FAN-n, where n is the fan
number.
Present Indicates whether the fan unit is present (Yes or No).
Health OK Indicates that the fan unit is present and
communicating with the CMC. In the event of
a communication failure between the CMC
and the fan unit, the CMC cannot obtain or
display health status for the fan unit.
Critical Indicates that at least one Failure alert has
been issued. Critical status represents a system
failure on the fan unit, and corrective action
must be taken immediately to prevent
overheating and system shutdown.
Unknown Displayed when the chassis is first powered on.
In the event of a communication failure
between the CMC and the fan unit, the CMC
cannot obtain or display health status for the
fan unit.
Speed Indicates the speed of the fan in RPM.