Quick Reference Guide

98 RACADM Subcommands
Examples
• racadm setniccfg -m server-1 143.166.152.39
143.166.152.1 255.255.255.0
OK
• racadm setniccfg -m server-9 143.166.152.39
143.166.152.1 255.255.255.0
ERROR: Server in slot 9 is an extension of the
server in slot 1.
• racadm setniccfg -k 100 full
Speed and Duplex settings modified successfully.
• racadm setniccfg -v 1 7
-v
Arguments:
•< vlan id > = 1 to 4000 (1 and 4000 inclusive), 4021 to 4094
(4021 and 4094 inclusive)
• <vlan priority> = 0 to 7 (0 and 7 inclusive). The highest
VLAN priority (7) is intended for network-critical traffic such
as Routing Information Protocol (RIP) and Open Shortest
Path First (OSPF) table updates. The lowest priority value (0)
is the default.
(RIP) and Open Shortest Path First (OSPF) table updates.
The lowest priority value (0) is the default.
• (no value supplied): Remove the vlan tag
-o
Disables the Ethernet management port completely.
-p Disables IPv4/IPv6 protocol.
-k
Specifies the speed and duplex for the NIC.
Arguments:
•< speed > = 10 , 100
•< duplex >= half , full
• (no value supplied): Autonegotiate
Table 2-38. setniccfg Subcommand Options (continued)
Option Description