Quick Reference Guide

RACADM Subcommands 95
where 0 is disable and 1 is enable
Options
Example
• racadm setflexaddr -i 1 0
Slot 1 FlexAddress state set successfully
• racadm setflexaddr -f A 1
Fabric A FlexAddress state set successfully
• racadm setflexaddr -f idrac 1
setled
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the state (blinking or not blinking) of the LED on the specified module.
Usage
racadm setled -m <module> -l <ledState>
Table 2-36. setflexaddr Subcommand Options
Option Description
-i <slot#>
<
state>
Enables/disables FlexAddress for the specified slot.
-f
<
fabricName>
<
state>
Enables/disables FlexAddress for the specified fabric.