Quick Reference Guide

94 RACADM Subcommands
setchassisname
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the name of the chassis in the LCD.
Usage
racadm setchassisname <name>
NOTE: Chassisname is a maximum of 64 non-extended ASCII characters
Example
racadm setchassisname dellchassis-1
The chassis name was set successfully.
setflexaddr
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Enables/disables FlexAddress on a particular slot/fabric.
NOTE: If the fabric type is determined to be Infiniband, the operation is canceled
and the command returns an error. If the FlexAddress feature is not activated, the
command will return an error.
NOTE: The server must be powered off to change the slot state. All servers must be
powered off to change the fabric state.
Usage
racadm setflexaddr [-i <slot#> <state>]
[-f <fabricName> <state>]
<slot#> = 1 to 16
<fabricName> = A, B, C
<state> = 0 or 1